These instructions apply to the 7-inch Flipper, FD90AID-7.

  • Place the display in the stowed position.
  • Remove the existing (6) 4-40 x ¼” flat head black oxide screws from the mounting plate.
  • Be careful to hold the mounting plate & torsion spring in place. Do not remove the mounting plate from its position as the torsion spring will fall out.
  • Insert the swivel base mounting plate on top of regular mounting plate.
  • Attach swivel base with (6) 4-40 x 3/8” 100 deg flat head black oxide screws.

Category: General FAQ
Tags: ,

← FAQ