Firmware Update for FD932DVD-LP-2 or FD932DVD-LP-2-AV to correct Last Volume setting

This free software update will automatically set your FD932DVD-LP-2 or FD932DVD-LP-2-AV to start at a medium volume level.

First, obtain the DVDROM.BIN file from the Flight Display Systems technical support staff.

NOTE: You can perform this firmware update at anytime you choose. That includes while on the ground, or while flying once. The player does not have to be removed from the aircraft or be returned to our headquarters.

  1. You need 1 USB thumb drive.
  2. Take the DVDROM.BIN file and copy it to the thumb drive.
  3. Power up the DVD player and make sure you have a monitor on showing that the DVD player is powered on. Do not have a disk inside of it.
  4. Insert the thumb drive into the DVD USB slot.
  5. Push the USB/SD button on the player and select the USB mode, which will display on the monitor. The player will automatically see the thumb drive with the patch and update the player as it will tell you on the screen which will take less than a minute.
  6. When it is done, the screen will flash and the FLIGHT DISPLAY SYSTEMS logo will come up. Verify the volume issue has been corrected by pressing either the VOLUME – or VOLUME + and seeing the volume is at half level instead of being at maximum level.
  7. Increase the volume to maximum and turn the player off. Then turn the player back on and check the volume again. It should be at mid level.
  8. Remove your USB thumb drive.

The end. Please contact Technical Support if you have any questions or need assistance with this free software upgrade.

How do I update the firmware for the FD932DVD-BLU?

The Support Staff at Flight Display Systems can provide you with several unique firmwares for the Blu-ray player FD932DVD-BLU.

These firmwares allow you to select different Blu-ray regions by default. You can also delete the FLY HD parrot logo from your boot screen with a new firmware.

How to Update Firmware

  1. Download the ISO file from our FTP server.
  2. Burn this file to a DVD or CD.
  3. Put the disc into the FD932DVD-BLU.
  4. After reading the disc, the screen connected to the FD932DVD-BLU will prompt you to select the “Update” button.
  5. Press ENTER on your remote.
  6. Wait 1 minute. The progress bar will advance.
  7. When the FD932DVD-BLU ejects the disk, remove the disk, shut the tray.
  8. The FD932DVD-BLU will reboot automatically and have the new software installed.