1. Tie the Y-positive with the C-positive.
  2. Tie the Y-negative with the C-negative.
  3. Use the positive side of the connectors to go to the center conductor of the Composite video.
  4. Use the two lows (C-low and Y-low) to the return video.

For example: Referencing the Installation Manual for the 26-inch LCD, you would tie pins 5 and 7 together (these are the highs), and then also tie pins 6 and 8 (these are the lows).

Please note that in doing this, the monitor resolution may look grainy or over-pixelated because it is too sharp. To fix this, simply go into the on-screen monitor menu and reduce the sharpness down to your preferred level.

Category: Aircraft LCD Monitors
Tags: ,